Wireline Products | Releasable Rope Socket / Drop Bar
The Omega Releasable Rope Socket can be used with either slick or braided wireline and is designed to release only in the event the toolstring becomes stuck downhole. The device is activated by a drop bar which works in a similar manner to a go-devil or snipper.
When the drop bar contacts the release trigger, the collet releases the lower fishing neck. The upper housing and drop bar are retrieved to surface leaving a clean fishing neck. Simply changing the internal clamping mechanism converts the Omega Releasable Rope Socket from slickline to braided line.
Download The Releasable Rope Socket Data Sheet
Releasble Rope Socket Pre Run Checks
Drop Bar
The Releasable Rope Socket (RRS) roller Drop Bar is utilized to activate the release trigger of the (RRS) and allow recovery of the wireline, drop bar and the upper section of the RRS from the wellbore.
The drop bar is available to suit all wire sizes and can be fitted with rollers based on tubing size and any restrictions in the wellbore. The roller drop bar is utilized where deviation affects the use of a standard drop bar.
Download The Drop Bar Data Sheet
Technical Data Sheets
463-0150-001 Technical Data Sheet
463-0188-001 Technical Data Sheet
463-0188-017 Technical Data Sheet
463-0240-002 Technical Data Sheet